キャップ付アルミフード 6インチ用
キャップ付アルミフード 6インチ用
残り 1 個
受取状況を読み込めませんでした
2年保証(電子部品は1年)
Item#:CE-AAAF6-94020
- シュミット補正板への結露形成を防止します
- 軸外グレアが光学系に入るのを防ぎます
- 堅牢なボディと内部のベルベット張り面で迷光を低減
- 2つの調整可能なクリップで簡単に着脱できます
- ベース部のケーブル管理スロット。ファスター/ハイパースター構成やCelestron結露ヒーターリングとの併用に最適です
- 付属のカバーキャップが、使用していない時に望遠鏡をほこりから保護します
製品仕様
製品仕様
| 標準仕様 | |
|---|---|
| 素材 | アルミニウム(プラスチック取り付けクリップ付き、内部はベルベット張り) |
| カバーキャップ | アルミニウム - 付属 |
| 重量 | 1.2ポンド(約0.54kg) |
| 寸法 | 直径190.5mm × 長さ241.3mm |
| ケーブルスロット寸法 | 幅31.75mm × 長さ38.1mm |
| カバーキャップ重量 | 90.7g |

Item#:CE-AAAF6-94020
6インチ Celestron シュミット・カセグレン望遠鏡チューブ用のアルミニウム製結露防止リング(カバーキャップ付き)です。野外での観測に欠かせないアクセサリーで、チューブを保護します。結露防止リングはシュミット補正板の放射冷却を低減させ、夜空への放射を遮断することで、補正板が露点以下になるまでの時間を延ばし、レンズへの結露形成を防ぎます。アルミニウム製結露防止リングはまた、望遠鏡に入る迷光をブロックすることで画像コントラストを向上させ、眼視観測と天体撮影の質を高めます。6インチ シュミット・カセグレン望遠鏡チューブで、このアルミニウム結露防止リングをご安心して使用ください。あなたの望遠鏡に合わせて設計されています。
構造
アルミニウム結露防止リングは、6インチ Celestron 望遠鏡チューブに完璧にフィットします。結露防止リングの外側は堅い アルミニウム製円筒形で、折れ曲がったり、たわんだり、変形したりすることはありません。内部はベルベット張りで、追加の迷光と余分な湿度を吸収し、観測と撮影時に最適なコントラストを実現します。調整可能な2つのクリップを使用して結露防止リングを望遠鏡チューブに取り付け、ぴったりしたフィットを確保します。
耐久性に優れた軽量のアルミニウムでカバーキャップも製造しました。望遠鏡を使用していないときは、カバーキャップを結露防止リングに装着して、シュミット補正板を迷光やほこりから保護します。カバーキャップは天体撮影用のダークフレームを素早く簡単に取得できるようにします。
ファスター/ハイパースター構成で シュミット・カセグレン を使用することが好きな天体撮影家なら、結露防止リングの前部からケーブルを引き出すことに慣れているでしょう。アルミニウム結露防止リングのベース部に統合されたケーブル管理スロットでセットアップをシンプルにしてください。このスロットで、必須のケーブル(結露ヒーターリング用ケーブルなど)を簡単に配線しながら、光害の漏れを防ぐことができます。また、望遠鏡チューブの上下にはアリガタレール対応カットアウトがあり、どの構成でも良好なフィットが確保されます。
Suggested Accessories
Categories
Q:
The Aluminum Dew Shield is compatible with 6" or larger Celestron Schmidt-Cassegrain telescopes (SCTs) built since the year 2006. I’m not sure when my SCT was built. How do I determine if the Aluminum Dew Shield is compatible?
The Aluminum Dew Shield is compatible with 6" or larger Celestron Schmidt-Cassegrain telescopes (SCTs) built since the year 2006. I’m not sure when my SCT was built. How do I determine if the Aluminum Dew Shield is compatible?
You can determine if the Aluminum Dew Shield is compatible with your Celestron SCT by examining the design of its rear cell. This applies to fork mounted optical tubes and optical tubes with dovetail mounting bars. Older generation Celestron SCTs (the C8, C11, and C14) built before the year 2006 are not compatible with the Aluminum Dew Shield. These older optical tubes have either a flat face or a ribbed face on the rear cell. See photo examples below. 
Newer generation Celestron SCTs built in the year 2006 or later are compatible with the Aluminum Dew Shield. These newer OTAs have a trilobed shape on the rear cell. In addition, newer generation 14" SCTs have a rounded rear cell. See photo examples below. All 6” and 9.25” SCTs are compatible with the Aluminum Dew Shields. All EdgeHD and RASA models are also compatible. 

Q:
Can I leave the Aluminum Dew Shield on my telescope when I am transporting it?
Can I leave the Aluminum Dew Shield on my telescope when I am transporting it?
We recommend removing the dew shield and placing the telescope’s own dust cover on during transport. If you do choose to leave the dew shield on, be careful that it does not get bumped or take impacts, otherwise it may become dented or deformed. Also, do not rest the telescope tube upside-down on the ground with the dew shield attached as the dew shield was not designed to support the weight of the telescope.
関連リンク
外部サイトに遷移します