
CE-BBSM-72033
Celestron SkyMaster Pro ED(スカイマスタープロ ED)シリーズは、アマチュア天文家をはじめ、遠方の対象物を観察するすべての方にとって理想的な選択肢です。本シリーズは、光学系、コーティング、内部パーツ、そして筐体素材に至るまで、すべてに最高水準のクオリティを追求しました。大口径の対物レンズ、高屈折なBaK-4プリズム、そしてED(特殊低分散)ガラスの採用。さらに、セレストロン独自の「XLTコーティング」を施したフルマルチコート光学系により、その視界は天体観測用双眼鏡の新たなスタンダードを確立しています。
ED(特殊低分散)対物レンズ
ED(特殊低分散)ガラスは、高倍率の光学系で一般的に見られる「色収差(対象物の縁に見える色にじみ)」を事実上排除します。SkyMaster Pro EDは、優れた色収差補正により、視野の端から端まで非常にシャープで、カミソリのように鋭い解像感を実現しました。
しかし、すべてのEDガラスが同じ性能というわけではありません。セレストロンの高品質なEDガラスは、非EDモデルの双眼鏡と比較して、より明るく鮮明な像を提供します。その差は、特に薄暗い低照度下での観察において極めて顕著に現れます。

コーティングとプリズム
Celestron SkyMaster Pro EDのすべてのレンズ面にはフルマルチコートが施されており、セレストロン独自の「XLT光学コーティング」テクノロジーを採用しています。当社の天文台グレードの望遠鏡にも使用されているこの強力なコーティングは、反射率を抑え、可視光スペクトルの広い範囲において極めて高い光透過率を実現します。さらに、内部のプリズムには高品質なBaK-4ガラスを採用し、光の透過率をより一層高めています。これらのフルマルチコートレンズとBaK-4プリズムが相乗効果を発揮することで、対象物からの光を最大限に瞳へと届け、より明るく、細部まで鮮明な視界を提供します。
対物レンズ
50mmの対物レンズは、優れた集光力を備えており、低照度下でも卓越したパフォーマンスを発揮します。対物レンズ径と倍率のバランスが絶妙で、夜空の広範囲を見渡したり、月や惑星を観察したり、また主要なディープスカイ・オブジェクト(星雲・星団・銀河)を探索したりするのに最適です。また、SkyMaster Pro EDは遠距離の地上観察においても優れた力を発揮し、特に夜明け(黎明)や薄暮といった光量の少ない時間帯での観察には、この上ない選択肢となります。
ボディ・筐体
独自設計のラバーアーマーと耐久性に優れたシャーシー(骨格)が、本体を重くすることなく、SkyMaster Pro EDをダメージから保護します。また、約21mmという極めて余裕のあるアイレリーフと、伸縮式のツイストアップ見口により、眼鏡をかけている方もそうでない方も同様に、快適な観測をお楽しみいただけます。眼鏡をご使用の場合は、見口を下に回して(収納して)覗き込むことで、視野の隅々まで見渡すことが可能です。眼鏡を使用しない場合は、見口を適切な位置まで引き出すことで、最適な観察距離に瞳を固定することができます。
多彩な観察スタイル
Celestron SkyMaster Pro EDは、三脚への取り付けに対応しています。別売の三脚アダプターを使用すれば、標準的な写真用三脚や一脚に固定でき、長時間の観測やデジスコーピング(接眼レンズ越しの写真撮影)を安定した状態で行えます。
また、本機の接眼レンズにはネジ切り加工が施されており、標準的な31.7mm天体用フィルターを装着可能です。最適なフィルターを選ぶことで、地上・天体どちらの観察においても劇的な変化を実感できるでしょう。地上観察では 砂浜、雪原、水面の眩しさを抑え、天体観測では 眩しさのカット、目への負担軽減、コントラストの向上、さらには光害の影響を最小限に抑えることが可能です。
※フィルターを使用する際は、左右用に2枚1組(セット)が必要ですのでご注意ください。
さらに、あなたの発見を家族や友人と共有しましょう!SkyMaster Pro EDをスマートフォンアダプターと組み合わせれば、接眼レンズ越しに静止画や動画を簡単に撮影できます。
Suggested Accessories
Categories
Q:
What filter size is compatible with the threaded eyepieces on the SkyMaster Pro ED?
What filter size is compatible with the threaded eyepieces on the SkyMaster Pro ED?
SkyMaster Pro ED binoculars accept standard 1.25” astronomy filters.
Q:
In a telescope, it is necessary to remove the eyepieces to attach a filter. Is it also necessary to do so with the SkyMaster Pro ED binoculars?
In a telescope, it is necessary to remove the eyepieces to attach a filter. Is it also necessary to do so with the SkyMaster Pro ED binoculars?
No. The filter threading is located around the outside edge of the eyepiece lenses, so the filters thread directly into these without the need to remove any part of the binocular.
Q:
Won’t attaching filters to the eyepieces cause the filter edges to press into the skin around my eyes?
Won’t attaching filters to the eyepieces cause the filter edges to press into the skin around my eyes?
No. SkyMaster Pro ED eyepieces are specially designed to accommodate filters and make use of the binocular with them comfortable for the user. When filters are attached, extend the eyecups to their full extended position, and the padded surface of the eyecup will be higher than the edge of a standard Celestron 1.25” filter.
Q:
If I want to use the benefit of the filter adaptability of the SkyMaster Pro ED binocular, is it necessary to use two filters?
If I want to use the benefit of the filter adaptability of the SkyMaster Pro ED binocular, is it necessary to use two filters?
Yes. Two filters are needed to achieve the effect the filter selected provides – one for each eyepiece. However, if you only wish to use one on one side for comparative viewing, that’s fine as well.
Q:
Can I use a different filter on each eyepiece?
Can I use a different filter on each eyepiece?
Yes. Experimentation is a long-cherished aspect of astronomy. If you wish to use two different filters – one on each eyepiece – to achieve a particular visual effect, you can do so. In fact, we’d be interested to learn what you used and what the outcome achieved was. Please send us a message at Enter@celestron.com.
Q:
The SkyMaster Pro ED binoculars seem larger than the other SkyMaster binoculars. Why is that?
The SkyMaster Pro ED binoculars seem larger than the other SkyMaster binoculars. Why is that?
The SkyMaster Pro ED binoculars use larger Porro prisms in their optical design to maximize their optical throughput. Consequently, this requires a larger chassis to enclose them.
Q:
Does the SkyMaster Pro ED 7x50mm include a binocular tripod adapter?
Does the SkyMaster Pro ED 7x50mm include a binocular tripod adapter?
No. While the 7x50mm is tripod adaptable, its wide field of view and large exit pupils make it more commonly used as a handheld binocular for star-hopping, object location, and other activities that involve large amounts of movement to scan expansive areas of sky. For those who would like to mount the 7x50mm on a tripod, Celestron offers the easy-to-use Binocular Tripod Adapter, item #: 93524.
関連リンク
外部サイトに遷移します